From uucp Sat Jul 2 18:25 MST 1988 >From rupley Sat Jul 2 17:51:08 1988 remote from arizona Date: Sat, 2 Jul 88 17:51:08 MST From: "John Rupley" Message-Id: <8807030051.AA02516@megaron.arizona.edu> Received: by megaron.arizona.edu (5.54) id AA02516; Sat, 2 Jul 88 17:51:08 MST To: rupley!local Subject: forward hexcalc11 Status: R >From richardh@killer.UUCP Mon Jun 27 18:35:22 1988 Path: arizona!noao!ncar!ames!necntc!ncoast!allbery From: richardh@killer.UUCP (Richard Hargrove) Newsgroups: comp.sources.misc Subject: v03i063: hexcalc 1.1 Keywords: hex calculator utility Message-ID: <4622@killer.UUCP> Date: 28 Jun 88 01:35:22 GMT Sender: allbery@ncoast.UUCP Reply-To: richardh@killer.UUCP (Richard Hargrove) Organization: The Unix(R) Connection, Dallas, Texas Lines: 1875 Approved: allbery@ncoast.UUCP comp.sources.misc: Volume 3, Issue 63 Submitted-By: "Richard Hargrove" Archive-Name: hexcalc1.1 Brandon, Just what the net needs. Another calculator program! This one is modeled the TI Programmer II (decimal radix is still integer, though). I won't repeat the readme file here. I've tested the makefiles under MS-DOS, Microport Unix SYS V/AT, ATT SYS V, R3 (on a 3b2), SCO Xenix SYS V, and Intel Xenix 3.5 (SYS III based). All make without a hitch. If you think it is a reasonable contribution, post away. thanks, richard hargrove -------- cut here -------- cut here -------- cut here -------- cut here -------- From uucp Sat Jul 2 18:25 MST 1988 >From rupley Sat Jul 2 17:51:08 1988 remote from arizona Date: Sat, 2 Jul 88 17:51:08 MST From: "John Rupley" Message-Id: <8807030051.AA02516@megaron.arizona.edu> Received: by megaron.arizona.edu (5.54) id AA02516; Sat, 2 Jul 88 17:51:08 MST To: rupley!local Subject: forward hexcalc11 Status: R >From richardh@killer.UUCP Mon Jun 27 18:35:22 1988 Path: arizona!noao!ncar!ames!necntc!ncoast!allbery From: richardh@killer.UUCP (Richard Hargrove) Newsgroups: comp.sources.misc Subject: v03i063: hexcalc 1.1 Keywords: hex calculator utility Message-ID: <4622@killer.UUCP> Date: 28 Jun 88 01:35:22 GMT Sender: allbery@ncoast.UUCP Reply-To: richardh@killer.UUCP (Richard Hargrove) Organization: The Unix(R) Connection, Dallas, Texas Lines: 1875 Approved: allbery@ncoast.UUCP comp.sources.misc: Volume 3, Issue 63 Submitted-By: "Richard Hargrove" Archive-Name: hexcalc1.1 Brandon, Just what the net needs. Another calculator program! This one is modeled the TI Programmer II (decimal radix is still integer, though). I won't repeat the readme file here. I've tested the makefiles under MS-DOS, Microport Unix SYS V/AT, ATT SYS V, R3 (on a 3b2), SCO Xenix SYS V, and Intel Xenix 3.5 (SYS III based). All make without a hitch. If you think it is a reasonable contribution, post away. thanks, richard hargrove -------- cut here -------- cut here -------- cut here -------- cut here --------